E-Glass Chopped Strand Mat is made of randomly distributed chopped strands held together by binder. The area weight of chopped strand mat CSM is mainly used in hand lay-up, filament winding and compression molding processes. The typical FRP products are panels, tanks, boats, complete set of sanitary equipment, automotive parts, cooling towers, pipes etc |
◆ High tensile strength ◆ Allowing for use in hand lay up process to produce large area parts ◆ No airborne fiber when operating ◆ Good wet through and fast wet out in resins ◆ Rapid air lease ◆ Superior acid corrosion resistance |
Spec. (g/sqm) | Width (mm) | Area Weight | Moisture Content | Combustible Content (%) | |
(g/m 2 ) | Powder (EP) | Emulsion (EE) | |||
CSM100g/m 2 | (50~3120)±5 | 100±10% | ≤0.20% | 8.0-9.8 | 7.5-8.0 |
CSM120g/m 2 | (50~3120)±5 | 120±10% | ≤0.20% | 8.0-9.8 | 7.5-8.0 |
CSM200g/m 2 | (50~3120)±5 | 200±10% | ≤0.20% | 3.6-4.5 | 4.5-5.5 |
CSM225g/m 2 | (50~3120)±5 | 225±10% | ≤0.20% | 3.0-5.0 | 3.0-5.0 |
CSM300g/m 2 | (50~3120)±5 | 300±10% | ≤0.20% | 3.0-5.0 | 3.0-5.0 |
CSM375g/m 2 | (50~3120)±5 | 375±10% | ≤0.20% | 3.0-5.0 | 3.0-5.0 |
CSM450g/m 2 | (50~3120)±5 | 450±10% | ≤0.20% | 3.0-5.0 | 3.0-5.0 |
CSM600g/m 2 | (50~3120)±5 | 600±10% | ≤0.20% | 3.0-5.0 | 3.0-5.0 |
CSM900g/m 2 | (50~3120)±5 | 900±10% | ≤0.20% | 3.0-5.0 | 3.0-5.0 |
>>Hand Laid-up Coated on the mould release agent and gel coating,and then laying reinforced material, coated with roller and brush. | >>Filament Wingding By steel strip continuous cycle before and after operation, in moving forward on the filling mold of continuous fibre
|